Inductor

Inductor Types

Inductors perform a number of different styles of function within a circuit. Some types can be used for filtering and removing spikes on power lines, others are used within high performance filters. Others may be used within oscillators, and there are many other areas where inductors can be used.
As a result of this, there are many different types of inductor that can be obtained. Size, frequency, current, value, and many other factors means that there is a whole host of different types and forms of inductor.

Inductor basics

Although there are many different types of inductor, they all comply with the same basic laws of nature. Each inductor sets up a magnetic field around the conductor and also has a certain reactance.
Inductor circuit symbol
The basic parameters are used within the inductor, whatever type it is.

Note on Inductance:

Inductance is one of the basic factors that affect electrical circuits. Any wire or coil has a certain inductance associated with it which is caused by the magnetic field that is set up when the current flows. Energy is stored in the field, and the action of the coil is to exhibit a resistance to change of the current flow within the conductor or coil.
Click on the link for further information about Inductance


Inductor cores

Inductors are normally made in the form of a coil. The reason for this is that the magnetic field is linked between the windings and builds up. As such an inductor with a sufficiently large inductance can be built up more easily.
As the permeability of the medium in which the coil is located has a major effect on the inductance, a core running down the centre of the coil is often used.
Cores such as iron, ferrite and other magnetic materials are used. These all significantly increase the level of inductance that can be obtained, but care has to be taken in the choice of core to ensure its performance is suitable for the power level, frequency and general application of the inductor.

Different inductor core types

Like other types of component such as the capacitor, there are very many different types of inductor. However it can be a little more difficult to exactly define the different types of inductor because the variety of inductor applications is so wide.
Although it is possible to define an inductor by its core material, this is not the only way in which they can be categorised. However for the basic definitions, this approach is used.
  • Air cored inductor:   This type of inductor is normally used for RF applications where the level of inductance required is smaller. The fact that no core is used has several advantages: there is no loss within the core as air is lossless, and this results in a high level of Q, assuming the inductor or coil resistance is low. Against this the number of turns on the coil is larger to gain the same level of inductance and this may result in a physical increase in size.
  • Iron cored inductor:   Iron cores are normally used for high power and high inductance types of inductor. Some audio coils or chokes may use iron laminate. They are generally not widely used.
  • Ferrite cored inductor :   Ferrite is one of the most widely used cores for a variety of types of inductor. Ferrite is a metal oxide ceramic based around a mixture of Ferric Oxide Fe2O3 and either manganese-zinc or nickel-zinc oxides which are extruded or pressed into the required shape.
  • Iron power inductor:   Another core that can be used in a variety of types of inductor is iron oxide. Like ferrite, this provides a considerable increase in the permeability, thereby enabling much higher inductance coils or inductors to be manufactured in a small space.

Different mechanical inductor types and applications

Inductors may also be categorised in terms of their mechanical construction. There are a number of different standard types by which inductors may be categorised:
  • Bobbin based inductor:   This type of inductor is would on a cylindrical bobbin. They may be designed for printed circuit board mounting, even surface mount of they may be much larger and mounted via some other mechanical means. Some older versions of these inductors may even be in a similar format to normal leaded resistors.
  • Toroidal inductor:   This form of inductor is wound on a toroid - a circular former. Ferrite is often used as the former as this increases the permeability of the core. The advantage of a toroid is that the toroid enables the magnetic flux to travel in a circle around the toroid and as a result the flux leakage is very low. The disadvantage with a toroidal inductor is that it requires a special winding machine is required to perform the manufacture as the wire has to be passed thought the toroid for each turn required.
  • Multilayer ceramic inductor:   This type of inductor is widely used for surface mount technology. The inductor is manufactured within a ferrite or more commonly a magnetic ceramic material. The coil is contained within the body of the ceramic and is presented to the external circuit on end caps in the same way as chip capacitors, etc.
  • Film inductor:   This form of inductor uses a film of conductor on a base material. The film is then etched or shaped to give the required conductor profile.
As it can be seen, there are a number of ways to classify the different types of inductor. Each has its own advantages, and it is therefore necessary to make a decision about the various options available when choosing an inductor for a particular application. Modern materials and technology has meant that the performance of inductors has increased and many more options are open to the circuit designer whether for RF applications, combatting EMI, or for power applications.
By Ian Poole

Comments

Post a Comment

Popular posts from this blog

Transistor

Image
Introduction Transistors make our electronics world go ‘round. They’re critical as a control source in just about every modern circuit. Sometimes you see them, but more-often-than-not they’re hidden deep within the die of an  integrated circuit . In this tutorial we’ll introduce you to the basics of the most common transistor around: the bi-polar junction transistor (BJT). In small, discrete quantities, transistors can be used to create simple electronic switches,  digital logic , and signal amplifying circuits. In quantities of thousands, millions, and even billions, transistors are interconnected and embedded into tiny chips to create computer memories, microprocessors, and other complex ICs. Covered In This Tutorial After reading through this tutorial, we want you to have a broad understanding of how transistors work. We won’t dig too deeply into semiconductor physics or equivalent models, but we’ll get deep enough into the subject that you’ll understand how a tran
Read more

Resistor

Image
There are many different types of resistor available for use within electronic circuits. These different resistor types have somewhat different properties dependent upon their construction and manufacture. This makes the different types of resistor suitable for different applications. Over the years the resistor types used in mass electronics production have changed. Years ago, all the resistors used had leads and were relatively large, and by today's standards they offered a low level of performance. Today, the resistor types used are much smaller and offer much higher levels of performance. Fixed & variable resistor types The first major categories into which the different types of resistor can be fitted is into whether they are fixed or variable. These different resistor types are used for different applications: Fixed resistors:    Fixed resistors are by far the most widely used type of resistor. They are used in electronics circuits to set the right conditions in
Read more